Single-component vinyl adhesive, specially formulated for gluing down unvarnished solid wood floors of any size on concrete subfloors or other types of absorbent subfloors.
- High performance
- Highly flexible
- Optimum workability
Beige coloured paste STORAGE 12 months in dry place at temperatures from +5 to +25°C
FIELDS OF USE
-Fixing indoor parquet of the following types: laminated, industrial, lamparquet, narrow strips, pre-finished.
Cement-based screeds, cement-based plaster, cement-lime mortar, chipboard panels, heating floors, and masonite panels.
NATURE OF THE PRODUCT
WD-100 contains elastometic resins in watery dispersion, selected mineral charges, specific additives
OPERATIONS PRIOR TO APPLICATION
Before proceeding, make sure that the wood is in conditions of hygrometric balance with the room in which the parquet is to be fixed and that its humidity conforms to the manufacturer’s instructions.
Before glueing, always check screed humidity, which must be <2% (<0.5% anhydrite), using a carbide hygrometer. The adhesive should be applied by trowel with serrations suited to the size of the wooden strips.
Position the strips, exercising slight pressure so that they perfectly contact the adhesive. It is inadvisable to glue the sides of the strips together. However, comply with the manufacturer’s instructions.
HOW TO PREPARE THE MIXTURE ADECON E3 PLUS
WD100, adhesive is ready to use. Just stir briefly after the bucket has been opened and then use the product.