Skip to content
Need a hand? Chat to our friendly team on 0800 NZ TRADE (0800 698 7233)
Need a hand? Chat to our friendly team on 0800 NZ TRADE (0800 698 7233)

TECHNO TC LASTIC

This item is currently only available in-store.


Need a hand?

Give us a call 0800 NZ TRADE or Contact us

Synthetic rubber-based elasticizing and tackifying latex for cement-based mortars and adhesives.

MAIN FEATURES

High bonding performance

High elasticity

APPEARANCE

White liquid

STORAGE

12 months in a dry place, protected from freezing and high temperatures

FIELDS OF USE

Flexible adhesive

Pour TECHNOS+ or TECHNOLA or TECHNO-XL or TECHNORAP powder into

the latex. The mixture must be stirred until it becomes

creamy. This product is recommended for laying stable natural stone

not affected by humidity or ceramic materials in the following cases:

- medium and large tile sizes on facades or places exposed to considerable temperature variations

- on old tiles outdoors

- on heating floors

- on RASOLASTIK-PLUS and RASOGUM +

- on plasterboard. Use of PRIMER-T PLUS prior to fixing is not essential but recommended.

Adhesive for vitreous mosaic on net backing, installed in swimming pools.

Dilute TC-LASTIC with water in a 1:1 ratio. Blend TECHNOMOS into the obtained mixture. The resulting product provides an extremely tenacious bond and is highly flexible while maintaining the creamy consistency obtained when only water is used for mixing.

Flexible levelling coat

Blend RASO with TC-LASTIC by pouring the powder into the latex. The mixture must be stirred until the paste is creamy and lump-free. Recommended for use on surfaces exposed to considerable temperature variations, or on cracked concrete.

In this latter case, it is advisable to bury the fibreglass net into the first layer. As compared to levelling pastes mixed with water, this product possesses high bonding powers even on difficult substrates and is also highly elastic.

The surface must be levelled with two coats, the second applied 24 hours after the first and in layers up to 3 mm thick.

Finish the surface with a sponge trowel or flat trowel.

Products mixed with TC-LASTIC can be applied straight onto:

Cement-based plaster, cement-lime mortar, cement-based screeds, concrete, old ceramic floors.